Pureco Satin Sealer
$34.00
By Pureco
Satin Finish - New Polyurethane
Our polyurethane finishes are water based, non yellowing, self levelling and most of all super tough and exterior grade. Designed for use over any of our paints, or sealing transfers and decoupage. It has a satin sheen.
Perfect for use on high traffic furniture pieces, kitchen cabinets and outdoor furniture.
You can add up 30% water to thin out if you wish, just decant into a recycled container and mix well. You can also use a mister.
Can be applied with a brush, roller, sprayer and sponge.
Allow 4 hours between coats, 2 coats are recommended.
Cure time is 7-14 days depending on the weather. 25 degrees is optimum curing temperature.
- It is easy clean, self levels for use on interiors, exteriors and water clean up.
- It can be tinted with any of our paint colours and used as a glaze.
- Will repel staining and is a fantastic product for so many uses.
- Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
- Always do a test patch to see if this product is right for your project.
- Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
- No more than 2 coats should be required.
- Allow your first coat to dry thoroughly before applying your next coat.
- Coverage is 13 square metres per litre, depending on application technique and surface roughness.
- Drying Times Touch: 30 Minutes (at 25°C) ; Recoat: 4 Hours (at 25°C).
- Can be used for gluing down & sealing wallpaper.
- This product should not be used if air temperature is below 10°C or above 35°C.
- Do not apply in direct sunlight.
- Use in a well ventilated area.
- Water clean up. 100% washable.