Fusion Hemp Oil Wood Finish - Food Safe

$13.00
By Fusion

Size

This all natural food safe Hemp Oil Wood Finish is very easy to apply and moisturizes your hands at the same time! Goes on like liquid gold as we say here! Simply pour or brush on and wipe away the excess with a rag. Excellent over reclaimed or bare wood. It revives, conditions and protects wood for a beautiful, natural finish. 

Best on bare wood surfaces, where it will darken and richen the natural wood tones while adding a slight sheen, can be buffed for a higher sheen with multiple coats.

The oil will also help condition and protect the wood.The older the wood, the more Hemp Oil it will soak up and the darker it will become. This effect varies based on the type of wood as well, so we recommend testing a small area to ensure you are satisfied with the results.

Hemp Oil Wood Finish is food-safe, and can be used on wooden cutting boards, butchers’ blocks, and charcuterie boards. It also provides a wonderful finish for wood flooring.

Hemp Oil Wood Finish is different from the oil bought from food stores, as it goes through a specific process that allows the oil to dry on its own (without added solvents or chemical driers) and keeps it from going rancid.

Our Hemp Oil has a smell reminiscent of crushed walnuts, and is an environmentally-friendly, locally-produced finish with no additives or preservatives. Hemp Oil Wood Finish penetrates wood surfaces to protect from the inside out. This oil does not leave a surface film that will chip or scratch.

HOW TO USE IT 

We call this liquid gold! This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush it on, let it soak into the wood or paint finish and wipe away the excess with a rag.

COVERAGE

Coverage will vary taking into consideration what the oil is being applied. For example,  previously oiled surfaces will require very little oil, whereas bare wood will require more.

WHAT IT WILL LOOK LIKE

It will not turn your surface green. This oil will darken and richen the wood with a soft lustre sheen. Generally the older the wood, the more it will darken it. This will vary based on the type of wood/species and the age of the wood. It is highly recommended to try a small amount on an area to find out how your project will look with this application.

Over Fusion Mineral Paint it will increase the sheen ever so slightly giving protection against dust that can show on darker colours. Over Milk Paint it is an amazing finish! Soaking into and binding with the Milk Paint to create a tough Water resistant finish.

CURE TIME 

The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. For example if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth.

If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.

On furniture over Fusion Mineral Paint and Milk Paint all excess must be wiped back leaving behind the thinnest layer. This will take a day to dry to the touch and 10 days to cure hard.

WHAT ELSE CAN IT BE USED FOR?

Used inside, this food-safe oil finish is perfect to use in the kitchen on wooden cutting boards, wooden utensils or stone. Also provides a wonderful finish for flooring.

Hemp Oil is great for nourishing old leather like your boots, handbag or even your wallet. Metal can also be revived with a little Hemp Oil too. 

Wet sanding with Hemp Oil can really give you a buttery smooth velvety feel finish over the top of Fusion or Milk Paint. Using a soft grit sandpaper use the Oil as a lubricant to sand the finish smooth. The results are stunning.

Application Tool  Brush, lint free rag
Location  Interior/Exterior
Re-coat Time  As needed - if the wood looks dry, apply more.
Dry Time  1 - 14 days 
Top Coat Wax, Stain & Finishing Oil, Gel Stain or Tung Oil are optional for additional durability. If excess amounts of oil use a coat of odourless solvent to remove excess before applying Gel Stain & Top Coat.
Clean Up  Odourless Solvent  for surfaces. If on hands, gentle soap and water.
Coverage  See container. A little goes a long way - depending on wood species and how dry the surface is.
Finish/Sheen Matte to high sheen. Each additional layer and buffing increases the sheen. 
Recommended Uses  Food safe surfaces such as cutting boards, reclaimed wood or Milk Painted pieces. 
Can Be Applied To  All water based or oil based finishes for increased lustre, however it will not add additional durability.
Can Be Painted Over  Potentially once cured. 
How to Prep  Apply over any surface or top coat for desired effect except wax.
Cure Time  14-30 Days
Maintenance/ Cleaning  Light cleaners, as they will strip away the natural oil.