Pureco Stain & Glaze - Driftwood

Pureco Stain & Glaze is water based, with a translucent, matte finish. It is self sealing and easy to use.

As a glaze – wipe or brush on over detailed areas, appliques and carvings. Before it dries take a slightly damp cloth and wipe away from the raised areas, leaving the glaze in the detailed areas.

As a stain – using a lint free cloth or wide brush, smoothly apply thin layers of stain to your prepared raw wood, using long smooth strokes with the grain of wood. Wipe away excess with a slightly damp cloth.

Stain & Glaze are translucent so layers can be built up to create a more opaque finish if desired.

How to use

Ensure your painted piece is dry or your raw wood is clean and dry.

Stir the Stain & Glaze well.

Can be applied with a brush or lint free cloth.

Applying as a Stain or Glaze use thin light coats, wiping off excess with a slightly damp lint free cloth, before it dries.

Apply extra coats to build up the colour, wiping back as you go.

When using as a Glaze if it looks too dark try dry brushing over lightly with your paint colour.

Allow 8 hours to fully dry before using any sealers or oils over the Pureco Stain & Glaze.